Bathroom hardware pendant is a must-have product in modern bathroom space. Although its bathroom hardware is generally not as significant as the sanitary ware function, its small size can bring people a comfortable bathroom life. Of course, the bathroom hardware is in use. Inevitably, some stains will appear. If it is not regularly and reasonably cleaned, it will not only breed bacteria, but also make the whole bathroom space dull and colorless. How to clean the bathroom hardware pendant? Today Xiaobian is here to give you the following tips:

Clean bathroom hardware pendant tips:

1. Wash with clean water and dry the pendant with a special maintenance cloth (or other 100% cotton cloth).

2. Wipe gently with a damp cloth coated with soap or toothpaste (a special maintenance cloth for pendants or other 100% cotton cloth), then rinse with water. Do not use alkaline or alkaline detergent to wipe the bathroom hardware. So as not to damage the metal surface.

3. Gently wipe with a mild liquid cleaner or a colorless glass cleaner and rinse with water.

4. The cycle is generally 3 months. The wax oil with strong decontamination ability can be applied to the clean white cotton cloth to thoroughly clean the whole product, which can prolong the service life of the product. The products of ellin Yihao have rust, desoldering and other quality problems caused by non-human factors within five years, and can be repaired or replaced free of charge with the purchase vouchers; store customers can enjoy free decontamination and waxing services within ten years.

Note: Please remember to clean all the cleaning agent with water immediately after each cleaning and dry it with a special maintenance cloth (or other 100% cotton cloth). Otherwise, water stains may appear on the surface of the pendant.

Concerned about surprises

Label: bathroom hardware hanging daily cleaning tips

Previous: Hardware knowledge: six functions of spring Next: How to clean kitchen hardware in winter

Angle Steel Drilling Machine

China Angle Drilling Machine Suppliers

High Speed CNC Drilling & Marking Line For Angles

The production line is composed of infeed transfer table unit, rotating loading unit, feeding conveyor unit, marking unit, two drilling units, outfeed conveyor unit, hydraulic system and electrical control system etc.

angle size: 250*250*32mm

hole dia. 22mm,

rotation speed 2200rpm,

one hole takes 6 seconds.

One day (8 hours) gets 65 tons output.

9 minutes finish one angle length of 14 meters, with 60 holes.

Angle Drill Machine,Cnc Angle Drilling Machine,Angle Iron Drill Machine

Shandong EN FIN CNC Machinery Co., Ltd , https://www.shuofangcn.com