How to save meat ducks
Meat ducks have the advantages of fast growth rate, short feeding period, easy feeding, and few diseases. At present, raising ducks has become one of the important pillar industries for farmers to increase their incomes and become rich and well-off. However, the feed cost of farmed meat ducks is high, and the feed cost often accounts for about 80% of the total cost of raising. Therefore, to improve the economic benefits of meat duck farming, saving materials is the key. Here are a few ways to feed your ducks to save feed: The selection of meat ducks with excellent varieties and varieties has higher genetic potential, higher growth rate, strong disease resistance and high utilization rate of feed. At the same age, the same amount of feed is consumed, which is much faster than other breeds of meat ducks. The suitable growth temperature of the meat duck is generally between 12 and 24 ° C, and the feed can be effectively used in this temperature range. Therefore, it is necessary to create conditions as much as possible, such as adopting winter greenhouses and sheltering in the summer, to keep warm and cool to improve feed compensation. The diet should balance all poultry as “feeding according to energyâ€. When the energy level of the diet is high, the feed intake is small; when the energy level of the diet is low, the feed intake is more. Therefore, the ratio of protein to energy in the meat duck feed should be balanced. Otherwise, the feed consumption will increase, causing some nutrients to be wasted. If the diet is low in energy and high in protein, protein feed is wasted as energy consumption. The feed should be fresh and the ingredients should be fresh. Second, the feed should be stored in a ventilated, dry place, and a layer of moisture-proof material should be placed between the ground and the ground. The ingredients should be used up as soon as possible, so that they can be diligently fed to prevent knotting and mildew. Mildewed feed can easily cause poisoning and pulling of meat ducks, thereby reducing the utilization rate of feed. In addition, the feed store and duck house should pay attention to pest control and rodent damage. Rational use of additives, minerals, vitamins, amino acids and other nutritive additives is necessary, and other non-nutritive additives will also greatly improve the growth rate and feed utilization of meat ducks. Such as probiotics, enzyme preparations, organic acids, peptides, etc., have a significant effect on increasing meat duck weight gain and feed utilization. Feeding method should be reasonable, generally do not feed the original grain, the original grain is crushed, and the particle size of the synthetic full-price material can be different according to the age of the duck, but it should not be too thin, otherwise it will be easy to fly and waste. When adding materials, you can't save time and add too much at once. In addition to the proper construction and height of the trough, it is also necessary to pay attention to repairing the trough in time to prevent waste from being leaked. It is more appropriate to release the meat ducks in a timely manner in 40 to 48 days, because the weight gain and feed remuneration of the meat ducks have reached a peak. After 50 days of age, the weight gain of the meat ducks decreases, and the feed returns decrease. Therefore, timely release is also an effective measure to save feed. Liu Wanzhen
10W Mini Glue Gun Ptc Heating Features:
1. Versatile
2. Easy
3. Quick
4. Proective Nozzle Cover
5. Trigger Flow Control
6. Bonds instantly
7. High quality
8. High temperature or low temperature
Idea for many applications. Fastening various materials such as paper, cardboard, fabric,wood, lace,trims,leather,metal,glass, tiles, rubber, ceramics and flooring etc. Ideal for hobby and household repair,DIY&craft projects.
Designed and manufactured to the highest of
standards to ensure a robust and long life, we hope it provides you with many
years of trouble-free, safe and reliable service.
General Safety Information:
1. Check
if the plug cord was in good condition, and if there is stand before plug into
the electrical outlet ; Check if the used glue gun has glue flow through back
of the tunnel;
2. wait
5-10 minutes to allow glue to soften, stand up the glue gun on the table when
not in use;
3. Touch
nozzle to any clean, dry surface you wish to bond, to avoid any impurity stop
the nozzle;
4. If the glue could not flow from the nozzle when
the glue gun start to work, check if the glue gun are heating;
If glue
gun can not be heated, there are following reasons:
If glue
gun can be heated, there are following reasons: Nozzle has been stopped by any
impurity, ask careerman to manage it.
5. Do not use the glue gun
under moist climate, humidity will affect insulation and cause electric shock;
6. Do not touch the nozzle
or melted glue;
7. Do not remove out the melted glue stick from
the tunnel back side, it will damaged the glue gun as well as scalding person
hands.
8. Do not to disassemble or assemble any glue
gun accessories freely, it will cause glue gun do not work properly;
9. Keep out of reach of children and stocked it
beyond any of Children palpable side;
10. Only used for melting glue stick, no other
usage;
11. When in use, there are any glue flow back
from tunnel, stop using immediately, wait for careerman clean the glue;
12. Close the power if the glue gun not in use
after 15 minutes;
Important
Caution:
1．
Before use the glue gun, check
if the plug cord into electrical
outlet properly;
2． When glue gun
in first use, the heating element will have small smoke, it is normal
situation, but the smoke will disappeared after 10 minutes;
3． After power,
not for a long time in standby mode(not longer for 20 minutes), when the
suspension of use, unplug first.
4． Avoid to use
the glue gun under very hot or very cold environments.
5． Better not
work under direct cold wind blowing, it will reduce efficiency and loss power
6． When in
continuous using, do not press the trigger with great pressure, and try to
squeeze out the un-melted glue, it would damage the glue gun
7． Not
applicable for bonding heavy objects or objects needed strong adhesive
8． The quality
of glue stick will directly influence the glue gun function and sticking
objects quality;
9． If the
power cord is damaged, do not replace it by yourself, must ask for
professionals to replace it.
10． This tools must b e placed in its position when
not in use. And storage before the tools complete cooled.
11． Be careful when using any other electrical appliance
with flammable material.
12． Not applicable for a long time in the same
place.
13． Do not use an explosive gas atmospheres.
14． Note that heat may be the line of sigh, combustible
materials.
15． Do not leave equipment unattended when switched
on.
16． This appliance is not intended for use by
persons(including children) with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge, unless they have been given
supervision or instruction concerning use of the appliance by a person
responsible for their safety.
17. Children should be supervised to ensure that
they do not play with the appliance.
Using methods
1. Glue gun
using voltage is 110-220V AC,50/60Hz;
2. Tip gun
forward on stand and place a piece of cardboard under the nozzle
3. Use 7-8mm
(mini trigger glue gun), 11-12(big trigger glue gun), insert glue sticks
through
4. After power,
wait for 5-10 minutes to allow glue to soften
Mini Glue Gun 10W Mini Glue Gun, Mini Glue Gun, Small Glue Gun, Electric Glue Gun Ningbo Kingvos Electrical Appliance Co.,Ltd , http://www.kingvos.com
1
Plug cord into electrical outlet not
properly;
2
Glue gun has been destroyed owing to
inner cord short circuit;
tunnel at back of gun