Summer is coming, I don’t know how the shower installation of everyone’s bathroom is? I’m sweating back home, open the shower and the water to have a good contact! Today, Xiaobian will share the shower with you. Installation knowledge allows you to experience a comfortable shower in the summer.

Mixing valve height from the ground

The reserved inner wire elbow of the shower is prepared for the next step of loading the mixing valve. Its height is generally between 90-110cm, which can be determined according to the requirements of the owner or the average height of the couple. Out of 110cm, otherwise it will not be able to install the lifting rod shower, not less than 90cm, it is not good to open the valve every time.

Spacing between two inner wires

Experienced plumbers know that the standard spacing of the inner elbows of the shower is 15cm in concealed, the error is no more than 5mm, and the surface is 10cm. Remember to measure the centering. If it is too wide or too narrow, it will not be installed. Do not rely on adjusting the wire. The adjustment range of the wire adjustment is very limited.

After the wall tiles are attached, keep a plane with the wall

The silk head is reserved. It is necessary to consider the thickness of the wall tile. It is better to make it 15mm higher than the wall of the blank. If it is level with the wall of the embryo, you will find that the wire is too deep in the wall. It's not good to put on the shower, but I don't dare to get too much out of the wall. It's too high in the future. The decorative cover can't cover the silk and adjust the screws.

Pay attention to different styles of showers

Nowadays, the quality of people's life is constantly improving. The styles of showers come into being are various. The installation methods are different. There are mounted, concealed, wall-mounted, ceiling-mounted, as hydropower workers. Constantly learn and master the new product installation methods on the market.

Choosing a location is important

The shower is a bathing device. When people are taking a bath, they are not wearing clothes. Therefore, when choosing a shower, you should pay attention to its privacy. Generally, do not choose to be at the door or window. In addition, if there is a whole bath room, fully Communicate with the owner to see the size of the overall bath room. Look at the location where the shower mixing valve stays. Don't wait for the decoration. After the bath room is bought back, the position of the stay is not suitable.

Left hot right cold can't be wrong

The inner elbow outlet of the shower should be mastered. The left hot right cold can't be wrong. This is not only the national norm and the habits of the majority of the owners. What's more important is that the manufacturers' products are also produced according to the left hot right cold regulation. If you make a mistake, it may cause some devices to not work, or damage the device. This should be noted when the pipeline is laid.

Fixing the inner wire elbow

The fixing of the inner wire elbow is very important. If it is not fixed, the size cannot be positioned. It is very likely that the mixing valve will not be installed after the decoration.

The above is the knowledge of the shower installation brought by Xiaobian, grasp the installation knowledge of the shower, and wash away the exhaustion of you in the summer.

Blockboard is a multi-ply board with a block core. This gives the board optimum flatness of each panel as well as a high resistance to wrapping. Blockboard is obtainable in both lightweight and heavyweight, where by the heavyweight board is normally classed as laminboard.

 Luli Group Co., Ltd, is a leading supplier if wood panel products since year 1985, has the capability and capacity to produce high quality blockboard yet with competitive pricing. And we are able to assist you at all time with professional handling.

Advantages of Blockboard:

High dimensional stability

Termite and borer resistant

Stable in all weather conditions

The details of Blockboard:

Sizes: 1220mm x 2440mm(Standard Size), 1250mm x 2500mm or according to customer`s request.

Thickness: 15mm, 16mm, 17mm, 18mm, 19mm, 20mm, 22mm, 25mm, etc.

Core: Falcata/Malacca, paulownia, eucalyptus, fir, poplar, pine, birch, hardwood, etar, pine, birch, hardwood, etc.

Density: 450kg ~ 680kg/m3

Blockboard

Batten Blockboard,18mm Blockboard,Laminated Blockboard,Blockboard Price

Luli Group Co.,Ltd. , https://www.cnluli.com