In order to ensure the performance of the sound tube, what aspects should be paid attention to?
The quality of the acoustic tube is directly affected by the performance. This has a vital effect on the inspection of the pile. To ensure the performance of the sound tube, it must be strictly selected from the materials, welding, transportation, storage and use. check. Adjustable Pedestal For Raised Paver Floor Adjustable Plastic Pedestal,Adjustable Pedestal For Raised Paver Floor,Adjustable Pedestal For Balcony,Pedestal For Garden Decking Boardwalk Jiangxi Taurus Technology Co., Ltd , https://www.chinapedestal.com
Http://
The quality of the acoustic tube is directly affected by the performance. This has a vital effect on the inspection of the pile. To ensure the performance of the sound tube, it must be strictly selected from the materials, welding, transportation, storage and use. check.
First, the selection of the acoustic tube includes, the main pipe, the joint, the sealing ring, and the main pipe must be hydraulically tested before leaving the factory to ensure no water leakage. The welding quality and caliber of the joint should be matched with the main pipe, the sealing ring and the joint and The mains match, ensuring that the compression can achieve a good sealing effect.
Second, in the welding process, each must be fully welded, there must be no leaks and trachoma, to ensure that the welding points do not leak and do not open during the use.
Third, during the transportation process, especially during the rainy season, it must be covered with a crepe cloth to ensure that the acoustic tube is not exposed to rain during transportation, thus avoiding excessive rusting of the acoustic tube. Affect.
Fourth, in the storage process of the construction site, try not to store in the open air. This can effectively avoid rust, and the debris enters the main pipe, blocks the pipe, and affects the entry of the ultrasonic probe.
Fifth, in the process of use, it is not possible to violently operate, destroy the joint and the main pipe, and clamp the sound measuring tube. The main pipe must be completely inserted into the joint. During the pressing process, it must be pressed tightly to ensure the sealing effect. When tightening on the steel cage, it is not allowed to bend the acoustic tube. If it is bent, it will affect the detection of the ultrasonic probe.
Http://news.chinawj.com.cn 
Editor: (Hardware Business Network Information Center) http://news.chinawj.com.cn