What should be paid attention to when the tile is accepted?
The tile shop is good, and has a great relationship with the construction process. Therefore, the acceptance of the tile is very important. Generally, we can directly see the appearance of the tile. The appearance of the tile is nothing more than the time. There are no scratches on the porcelain surface. First, check whether it meets the design requirements First check whether the tile paving is in accordance with the design requirements. For example, if the owner asks for a diamond-shaped diagonal paving, then the method of cross-tiling or vertical paving cannot be used. In addition to the paving method, check whether the tile is laid in the correct direction, whether there is reversal; whether the tile and waistline are in the correct position, whether there is a bias or a height error. Second, check if there is a scratch gap During the tile laying process, it is easy to scratch or damage the tile due to careless construction. At the time of acceptance, it is necessary to first check whether the surface of the tile has scratches or stains that are difficult to remove, and whether the brick surface has broken and collapsed angles. Third, check for crack cracks Generally, when there is natural light exposure during the day, use the method of eye and hand to check whether there is crack crack on the brick surface. Crack refers to the cracking of the surface of the brick surface, but the bottom of the tile is intact, and the hand touch has a slight feeling of cutting hands; the crack refers to the crack of the whole brick surface from the surface to the bottom, and the hand touch feels obvious cutting hands. Fourth, check whether the gap is uniform In order to cope with the problem of thermal expansion and contraction of the tile, as well as ensuring the flatness of the tile, the seam between the brick and the brick is required when the tile is laid. At the time of acceptance, it is necessary to check whether the gap of the tile is even and beautiful. Generally, the width of the brick is 1 mm and cannot exceed 2 mm. Special effects can also widen the gap, such as 5mm. In addition, check the tightness of the edge of the tile. Simple Bathtub Simple Bathtub Guangzhou Aijingsi Sanitary Products Co.,Ltd , https://www.comoxvalleyhottubs.com