Is the high-rise apartment good?

Nowadays, with the rapid increase of urbanization, many residential areas in urban areas are higher and higher. For example, some buildings of up to three or forty floors are common in first-tier cities, while in modern building feng shui, the floors are higher. The better the feng shui price is, the more expensive it is, but are these high-rise homes worth us to buy? In fact, everything has two sides, we can not say it is not good, it can not be said are all advantages, the following together with the Xiaobian to learn more about the relevant content of the high-rise residential, you want to provide some help with your purchase .

How is the high-rise apartment?

1, the level of property management

If you are inclined to high-level, then property management is the most important factor to consider. As we all know, good properties are more considerate in the future, such as elevators, equipment maintenance, etc. If you encounter poor properties, elevators will stop due to improper maintenance, then you Will face dozens of high-rise buildings, it is quite a matter of concern, although the latter property companies can replace, but it is quite troublesome, so you should choose a good property company at the time of purchase.

2, parking spaces

Perhaps you think that the relationship between parking spaces and high-rise buildings is not large. In fact, they are also related to each other. Generally speaking, high-rise buildings are located in the center of the city, their own real estate is relatively scarce, and there are more households in high-rise residential buildings. Before buying a home, you must understand the number of parking spaces planned by the developer and whether there is a shortage of supply. Otherwise, your car has no place to stop.

3, air content

In general, the higher the number of floors, the more expensive the price. Of course, for a building with more than 30 floors, the landscape is very good, but on the other hand, if the building exceeds 30 floors, the air content will be reduced. Heart and brain diseases are not suitable for middle-aged and elderly people, so when selecting floors, members must be considered.

4, whether there is a hedging layer

For some buildings over 100m in size, there will often be a special hedge, so that once an accident occurs, it can be evacuated to the area. This should not be avoided. We should pay attention when buying houses.

Is the higher apartment better?

For the 1st to 3rd floors of the high-level building, if the green layout is good, it is equivalent to living under the canopy, the scenery is good, and at the same time it can maintain contact with the outside world. However, due to the proximity to the ground, the air circulation is slow, and the shadows and humidity are high. Poorly ventilated building areas are also more polluted, and the third floor is also just a lot of harmful substances, of course, high-rise residential is not the higher the better, but the higher the floor the more pressure, easy to produce reflection.

Summary: The above is about the high-tech residential good knowledge to explain, I believe that you readers have a better understanding of high-rise residential , of course, if you have better suggestions and ideas, please feel free to consult Xiao Bian.

Gas Industry Mass Flow Meter

Sealand is a trustworthy manufacturer of Gas Mass Flow Meter, Gas Mass Flowmeter, Gas Flow Meter, Gas Flowmeter, Gas Meter, ATEX, IECEx & CE approved.



The installation is as follows.

1. Installation Steps
a) Choose correct installation site, taking installation area, pipeline, transmitter location &

valve location into consideration;
b) Install the meter according to direction mark on sensor; c) Install the sensor & transmitter on pipeline;
d) Connect transmitter & sensor with 9-pin cable;
e) Start.


2. Site selection

a) Sensor stays away from mechanical vibration source, for example, pump. Use flexible pipe to connect meter with pipeline if inevitable. The housing of meter must be standalone, out of touch with any other device. There must be 3 times the size of sensor between 2 sensors if there are many flow meters on the same pipeline, to avoid resonance.

b) Do not install sensor on pipeline that easily expands with hot and contracts with cold, especially near expansion joint, which leads to a worse stability.

c) Sensor stays away from industrial electromagnetic field, such as large generator and transformer, better 5m at least. Such device influences the performance of drive coil and pickoffs. Make sure magnetic field intensity less than 400A/m.

d) Sensor shall be installed on lower pipeline, to be easily full of fluid.
e) Make sure Ex-mark meet application requirements if in hazardous area.

f) Build a sunshade if the meter is under direct solar radiation. g) Keep the meter from corrosive liquid.


Gas Mass Flow Meter, Gas Mass Flowmeter, Gas Flow Meter, Gas Flowmeter, Gas Meter

Zhejiang Sealand Technology Co., Ltd. , https://www.sealandflowmeter.com