The use of electromagnetic pulse valve in the dust collector
Jiangsu Jiajie Special Screw Co., Ltd , https://www.jiajiescrewcompany.com
When the pulse controller sends an electric signal, it activates the electromagnetic pulse valve. This causes the armature to move, opening the vent hole in the air chamber. As a result, the pressure in the rear air chamber is released, allowing the diaphragm to move backward. This action enables compressed air to flow through the valve’s output port, effectively "opening" the pulse valve. The sudden release of compressed air creates a powerful jet that is used for cleaning or other pneumatic applications.
The TMF-Z (DMF-Z) right-angle electromagnetic pulse valve is designed for efficient and reliable operation under various conditions. Below are its key technical specifications:
- **Environmental Conditions**: It operates efficiently within a temperature range of -10°C to +55°C, and can function in environments with relative humidity up to 85%.
- **Working Medium**: The valve is suitable for use with clean, dry air, with a dew point as low as -20°C to prevent condensation issues.
- **Air Source Pressure**: It requires an inlet pressure between 0.3 MPa and 0.6 MPa for optimal performance.
- **Electrical Specifications**: Available for DC24V (0.8A), AC220V (0.14A), or AC110V (0.3A). These options provide flexibility depending on the system's power requirements.
- **Connection Details**: The valve’s air inlet connects to the air tank, while the outlet is connected to the blow pipe. When installing, it is important to use Teflon tape on the threaded connections to ensure a tight seal. Additionally, the length of the threaded portion at the intake end should not exceed one-third of the total thread length to avoid over-tightening and potential damage.
This pulse valve is widely used in dust collection systems, industrial cleaning applications, and other pneumatic control setups where precise and rapid air bursts are required. Its durability, ease of installation, and compatibility with different power sources make it a popular choice in many industries. Proper maintenance and correct installation are essential to ensure long-term performance and reliability.