Small infrared camera snow removal tips

[ Huaqiang Security Network News ] Although the infrared camera is very powerful, it gives people a guarantee of security, but infrared cameras also have some problems. Snowflake problems often plague people, so how to solve these problems.
Infrared camera
1, the reason of the current, if you are outside the short distance, then you can use the centralized power supply 12V, if it is a long distance, it is not appropriate to use 12V power supply; because the long-distance infrared light heat 12V power supply all without built-in heat sink is easy to appear Burnout current is unstable;
2. The quality of the infrared lamp is poor. The angle of the infrared lamp and the infrared distance do not match the lens. Many companies use a variety of lamps with different angles to facilitate their purchase and installation. The advantage of using them is the same kind of lamp. You can barely use different millimeter-sized lenses. The disadvantage is that people always feel that the angle and distance of the lamp are not suitable for the lens. When the angle is not suitable, flashlight phenomenon or narrow electric phenomenon is easy to occur; when the distance does not match, for example If you use a 12mm lens, but use a light of ten to twenty meters, then you will have a gray phenomenon;
3, handicraft problems: many people do not concentrate, the astigmatism of the infrared light; scattered light causes light everywhere, but a gray phenomenon; the front end of the infrared light is not tight, concentrated infrared red lights So a sky
4, built-in is a poor camera, the illumination is extremely high; because many manufacturers use the very inferior camera built-in inside for the price competition, this kind of camera is very prone to snow phenomenon when the infrared light is insufficient.
5, the circuit design is unreasonable; we produce infrared cameras, not only to install the infrared light directly into the camera and then on the line, but to redesign and aging the camera circuit before loading. Many small-scale processing plants on the market use cheap electronic components, buy cheap infrared lamps, and solder them directly with electric soldering iron. There is no redesign or aging treatment for the circuit;
6. Another possibility is that if you have a lot of dust, especially in the wild, it may be that the infrared light in the camera captures the tiny particles that are invisible to the naked eye, which is not turned on during the day. In the case, the inner eye and the camera do not feel obvious;
Solution:
1, using a highly stable transformer
2, using high quality infrared light
3. Replace the inferior camera inside. It is possible that the illuminance of the camera is extremely high, and in the case where the outdoor brightness is not high, snowflake is highly prone to occur; black-and-white cameras or color-to-black-and-white color cameras are used;
4, all replaced, use star-level camera; if there is no light at all, plus the astigmatic infrared light infrared camera to solve the following difficulties:
1. After installing the infrared lamp, it is necessary to reset the circuit and aging; pay attention to the manual problem, pay attention to the problem that the infrared light has a concentrated light; this requires the installer to have considerable sense of responsibility and patience;
2, the built-in camera must have a minimum of 0.1 illuminance, otherwise it is easy to appear snow; this requires manufacturers to have the necessary investment and serious determination to purchase;
3. The infrared light of a long-distance camera generally has a relatively large power. Generally, a 220V-powered camera with built-in high-quality transformer and fan is used.
4, to use high-quality infrared light, to prevent the excessive power of the infrared light glare or whitening phenomenon; lead to the image is not clear or gray sense; pay attention to the angle and distance of the infrared light, but also pay attention to its life;
5, to prevent astigmatism and excessive light collection, astigmatism is prone to white, and the collection of light is prone to flashlight phenomenon.

 We focused on international export product development, production and sales. We have improved quality control processes of Crystal Roller Shutter Door to ensure each export qualified product.
If you want to know more about the products in Crystal Roller Shutter Door, please click the product details to view parameters, models, pictures, prices and other information about Crystal Roller Shutter Door.
Whatever you are a group or individual, we will do our best to provide you with accurate and comprehensive message about Crystal Roller Shutter Door!

Crystal Roller Shutter Door

Commercial Rolling Up Door,Roller Shutter Door for Shop,Crystal Roller Shutter Door,Commercial Roller Shutter Doors

Shenzhen Hongfa Automatic Door Co., Ltd. , https://www.hongfadoor.com