How to use wood chip machine
Thermostatic Bar Valve,Hand Shower Thermostatic,Thermostatic Shower System kaiping aida sanitary ware technology co.,ltd , https://www.aidafaucet.com
Wood pellet machine is one of our main products, using international advanced technology, superior performance and reasonable price, deep new and old customers unanimously approved the following small series to introduce you to use wood pellet machine:
　　 1. Long-term wood pellet machine operations, should be fixed on the basis of the cement.
　　 2. After the sawdust granulator is installed, check the fastening condition of each fastener . If it is loose, it must be tightened .
　　 3. Check if the belt tightness is appropriate , and whether the motor shaft and the wood chip machine shaft are parallel .
　　 4. Before starting wood pellet machine, to rotate the rotor by hand, check fingers, and the rotor hammer is flexible and reliable operation, presence or absence of collisions shell, rotation of the rotor coincides with the machine direction is indicated by arrows, with the motor Whether the wood pellet machine lubrication is good .
　　 5. Do not change the pulley randomly , in case the rotation speed is too high, the explosion chamber will explode , or the rotation speed is too low, which will affect the working efficiency .
　　 6. After crushing station starts the first 2 or 3 minutes idling, no abnormal phenomenon feeding after work.
　　 7. Work should always attention to the operation of wood pellet machine, feed should be uniform to prevent blocking boring car, do not overload time. If there is vibration, noise, the bearing and the body temperature is too high, other spray material outwardly Phenomenon , should stop parking immediately , and then continue to work after troubleshooting .
　　 8. The crushed materials should be carefully inspected to avoid accidents such as copper, iron, stones and other hard objects entering the crushing chamber .
　　 9. The operator do not wear gloves when feeding wood pellet machine side stand, to prevent rebound debris wounded face.
Companies adhering to the " integrity services, sustainable management, unity and cooperation, excellence " spirit , and constantly pursue the best quality , create an excellent service brand , if necessary , you are welcome to call us !
---
**Wood Pellet Machine: A Guide for Safe and Efficient Operation**
Our wood pellet machine is one of our core products, designed with cutting-edge technology, offering superior performance and competitive pricing. It has gained widespread approval from both new and returning customers.
Here’s a detailed guide on how to properly use and maintain your wood pellet machine:
1. **Installation**: Ensure the wood pellet machine is securely mounted on a solid cement base to ensure stability during long-term operations.
2. **Fastening Check**: After installation, inspect all fasteners. If any are loose, tighten them immediately to avoid potential malfunctions.
3. **Belt and Alignment**: Verify that the belt is properly tensioned and that the motor shaft and the machine shaft are aligned. Misalignment can cause unnecessary wear and reduce efficiency.
4. **Pre-Operation Inspection**: Before starting the machine, manually rotate the rotor to check for smooth movement. Ensure that the hammers move freely, without any collision with the housing. Also, confirm that the rotor rotation direction matches the arrow indication on the machine, and check the lubrication of the motor.
5. **Pulley Adjustment**: Avoid changing the pulley without proper knowledge. Incorrect adjustments can lead to either excessive speed (risking explosion) or insufficient speed, which reduces productivity.
6. **Initial Run**: Allow the machine to idle for 2–3 minutes after startup. If no abnormalities occur, proceed with feeding materials.
7. **Operational Monitoring**: Always keep an eye on the machine while it's running. Feed materials evenly to prevent blockages. Do not overload the system. If you notice unusual vibrations, loud noises, overheating bearings, or foreign material being expelled, stop the machine immediately and address the issue before resuming.
8. **Material Inspection**: Carefully inspect all raw materials before feeding them into the machine. Avoid hard objects like metal pieces or stones, as they can damage the internal components.
9. **Safety Precautions**: Operators should never wear gloves when feeding the machine. This helps prevent injuries from flying debris.
At our company, we follow the principles of "integrity-based service, sustainable management, teamwork, and excellence." We continuously strive to provide top-quality products and exceptional customer service. If you have any questions or need assistance, feel free to contact us anytime. We are here to help!