During the process of casting and metal liquid solidification, the surface of the casting will oxidize due to the high temperature, and the oxide layer will be uneven. The metal oxide on the surface of the casting may interact with the oxide in the shell to promote the uneven surface of the casting, which is remarkable. Increase the roughness of the surface of the casting.
Cooling of the casting under a protective atmosphere is an important part of obtaining a high quality surface. After the casting is cast, it is cooled under an inert gas or a reducing protective atmosphere to prevent oxidation and prevent surface decarburization, and to protect the surface of the casting from the oxidation temperature. The surface of the casting with good surface protection is silver grey, silver white or colored oxidized color after shelling. Cleaning has a great influence on the surface roughness of investment castings. The as-cast surface roughness of investment castings is originally low, and blast cleaning or water sand cleaning should be used to clean the surface. The blasting method is better than the surface roughness of the shot peening casting by 2 or more. Peeling often destroys the as-cast surface.
For stainless steel investment castings with high hardness, shot peening can also be used to improve efficiency, but the diameter of shot peening should be less than 0.3mm.
In short, the surface quality of castings is an important quality index for investment castings. The surface quality includes two related and not identical concepts of surface roughness and surface defects. Surface roughness refers to the uniform microscopic unevenness of the surface of the casting. Castings with low surface roughness can be produced only by preventing serious defects on the surface of the casting, and the surface roughness of the casting is low to achieve high dimensional accuracy.
There are many factors affecting the surface roughness of investment castings. It is necessary to carry out a set of strict technological measures from raw materials, molding to cleaning to reduce the surface roughness of castings.
The Fiber Laser Cutting Machine adopts servo motor bilateral driving. The whole machine is compact in structure, good in overall rigidity, stable in accuracy and performance. The equipment processing replaces the traditional mechanical knife with invisible beam. It has high processing precision, fast cutting and no damage to materials. The surface can be processed with any pattern. It is used for cutting and cutting carbon steel, alloy steel, stainless steel, copper, aluminum and galvanized sheet. It is a high-tech product integrating advanced technologies such as laser technology, mechanical technology and numerical control technology.
Performance characteristics:
1) The closed fiber Laser Cutting Machine has low
cost and consumes less power,it can blow air to cut all kinds of metal sheets
2) High performance, imported fiber laser, stable
performance, long service life.
3) High speed, high efficiency, up to 100 meters
per minute.
4) Lasers are maintenance-free.
5) The cutting quality is good, the deformation
is small, the appearance is smooth and beautiful.
6) The use of imported guide transmission
mechanism and servo motor, cutting precision.
7) Can desian any kind of graph or text to cut at
will, the operation is simple, flexible, convenient.
Fully Enclosed Fiber Laser Cutting Machine
Fiber Cutting Machine,Fully Enclosed Cutting Machine,Die Board Laser Cutting Machine,Fully Enclosed Fiber Laser Cutting Machine
Buluoer Intelligent Technology Co., Ltd. , https://www.buluoercuttingmachine.com