How to calculate the tap flow
The faucet can be said to be a very common hardware accessory in our home life, but many people will ask how the household faucet flow is calculated . Today Xiao Bian is here to introduce the flow calculation method of the household faucet, hoping to understand the household faucet. How to calculate the flow rate helps. The tap flow rate is related to tap water pressure. The higher the pressure is, the greater the flow rate is. Calculated with a diameter of 1.5 centimeters in 4 minutes, a pressure of about 9 liters/sec at 1KG pressure, and a flow rate of about 15.8 liters/sec at 3KG pressure, 6KG pressure It is around 31.77 liters/second. I usually calculate the tap water flow rate in the unit time: tap water pressure is 0.1-0.6Mpa, and the flow rate is about 1-3m/s, and the flow rate is usually 0.3Mpa or 1.5m/s. The formula is: flow = cross-sectional area X flow rate. We take the power of two faucets, DN20 faucet and DN15 faucet ceramic sealing valve caliber is the same, but the water supply pipe diameter slightly larger, DN20 faucet flow rate is slightly larger than DN15 faucet flow, calculation can be ignored. When the dynamic pressure is 0.1MPA (about 1kg), the flow rate is about 9-12L/min. When the dynamic pressure is about 0.3MPA, the flow rate is about 13-17L/min. When the dynamic pressure is about 0.6MPA, the flow rate is about 19-25L/L. minute. Therefore, when using faucets in daily life, we should pay attention to remember to turn off the faucet, otherwise it will cause a lot of waste. The above calculations on how to calculate the faucet flow will help you. For more information, please visit this website. Stay tuned. Faucet Gantry Flame Cutting Machine is the most widely used metal plate CNC Cutting Machine at the present stage.
4. Gantry CNC flame cutting machine applicable to steel market cutting, shipyards, wind turbines, steel structure plants, etc.
Gantry Flame Cutting Machine Plasma Cnc Machine,Gantry Type Plasma Cutting Machine,Air Plasma Cutting Torch,Gantry Flame Cutting Machine Jinan Huaxia Machinery Equipment CO.,Ltd , https://www.cnmetalcutting.com
1. Strong cutting ability, wide cutting range, good cutting effect, fast response and high cutting efficiency.
2. The gantry Flame Cutting Machine can simultaneously assemble up to 11 flame torches for straight strip cutting of medium-thick plates, which are heated bilaterally to prevent deformation.
3. Railway tracks of cutting machine that can be retrofitted. The longitudinal travel of the equipment can be extended by 30 meters, and it is suitable for installation in a workshop with a large site and a long plate.
